RPICT8 slave Version 5
  • RPICT8 slave Version 5
  • RPICT8 slave Version 5
  • RPICT8 slave Version 5
  • RPICT8 slave Version 5

RPICT8 slave Version 5

RPICT8_slave_OAPC

Connect up to 8 Current sensors to a Raspberrypi.

This is the slave version of the RPICT8 this can only work with a master RPICT board version 5 such as RPICT8 or RPICT7V1 or RPICT4V3.

Package includes slave stand off for mounting onto master board.

Rating (A)
Slave Type
£32.50
VAT excluded
Quantity
In Stock
121 Items

Description

Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other".

Slave type: Choose the slave number. There are 2 types. 'Slave 1 or 3' type or 'slave 2 or 4' type. This defines how the connectors are soldered to be stacked on the board just below it. You can choose 'unsoldered' to solder the connector yourself which allows you to decide the slave type at installation time.

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding  electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Product Details
RPICT8_slave_OAPC
121 Items

4 other products in the same category:

OPICT8 for Orange Pi

Reference: OPICT8_LOMR

OPICT8 for Orange Pi

OPICT8 - Orange Pi AC current hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Orange Pi are not included.
£38.00
More OPICT8 for Orange Pi
In Stock
RPICT4V3 Master Version 6

Reference: RPICT4V3_JSTL

RPICT4V3 Master Version 6

RPICT4V3 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included. Earlier version can be found here. RPICT4V3 VERSION 5.
£48.00
More RPICT4V3 Master Version 6
In Stock
RPICT4V3 Master Version 5

Reference: RPICT4V3_MXUL

RPICT4V3 Master Version 5

RPICT4V3 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included.
£38.00
More RPICT4V3 Master Version 5
In Stock

You might also like

RPICT8 Master Version 5

Reference: RPICT8_GCFK

RPICT8 Master Version 5

RPICT8 - Raspberrypi AC current hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included.
£38.00
More RPICT8 Master Version 5
In Stock
Slave Spacer RPICT8 - Enclosure Kit

Slave Spacer RPICT8 - Enclosure Kit

Slave enclosure spacer for RPICT8. For use with the enclosure kit for RPICT. For slave slot only. Master slot uses different enclosure spacer. Package includes 1x 3D printed Parts Note. 3D printed parts are fragile. Handle with care.
£4.50
More Slave Spacer RPICT8 - Enclosure Kit
In Stock