RPICT4V3 Master Version 5
  • RPICT4V3 Master Version 5
  • RPICT4V3 Master Version 5

RPICT4V3 Master Version 5

RPICT4V3_MXUL

RPICT4V3 - Raspberrypi AC current and voltage hat

Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other".

Voltage Sensor Type: Choose the desired support for the voltage port.

Sensors and Raspberrypi are not included.

Rating (A)
Voltage Sensor Type
£38.00
Quantity
In Stock

Description

 

 
 

RPICT4V3 Version 5

Raspberrypi AC current and voltage hat



Online Documentation


  • 4x AC Current Ports.
  • 3x AC Voltage Ports.
  • Provides Irms, Vrms, RealP, ApparentP, ReactiveP, PFactor, Frequency, EstimatedP.
  • View/record data using Linux / Python / Emoncms / Grafana / MQTT and more.
  • Configurable from serial port.
  • Power combinations configurable (Current-Voltage pairing).
  • Open Source Arduino Firmware.
  • Stackable with RPICT8 Slave and RPICT4V3 Slave
  • Computes 3 phase power.

Package Content

  • 1 RPICT4V3 Unit.
  • 4 Mounting Stand off with screws.
The listing does not include sensors and Raspberrypi.

Recommended Sensors

Voltage:

Current:

(for any other CT sensor please contact us to have adapted resistor mounted and calibration coefficients calculated)

Technical Specifications

Microcontroler Atmel Atmega328p
MCU Frequency 16Mhz
Operating Voltage 5V
Waveform Sampling 4400sps (1700sps in 3 phase)
Fastest Data Polling 800ms (for 4 channels)
Vertical Resolution 12 bits (4096 steps)
Communication UART Serial Port
Firmware Arduino (open source)
Dimensions 56x65mm
Programming port 6 pin ISP
Compatible OS Any supporting GPIO serial port access
Compatible Raspberrypi All of Family 1,2,3,4 and Model A, B
Compatible CT Current output type
AC Current Range Options from 20A to 600A
AC Voltage Range Options from 140V to 280V
Smallest Readable Current Approx 50mA to 150mA

Scope of Use

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This
evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

 

Product Details
RPICT4V3_MXUL
13 Items
4 other products in the same category:

Reference: RPILCT4V3

RPI_LCT4V3

RPI_LCT4V3 400A 4 CT port 3 Voltage port 400A capability RPI_LCT4V3 is similar to RPICT4V3 with screw terminal connectors for connecting larger CT sensors. Unit comes ready for 400A CT using SCT-024/5A. Documentation
Price £35.00
More
In Stock

Reference: RPIWA_CT4V3

RPIWA_CT4V3

CONTACT US FIRST TO PURCHASE THIS PRODUCT. WE RECOMMEND THIS PRODUCT BELOW INSTEAD FOR FIRST TIME USE: RPICT4V3 RPIWA_CT4V3 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support...
Price £45.00
More
Product available with different options

Reference: RPICT3V1T1_XASY

RPICT3V1T1

RPICT3V1T1 - Raspberrypi AC current, voltage and temperature hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included.
Price £20.00
More
In Stock
You might also like

Reference: ZMPT_3X_IXKR

ZMPT 3X Voltage Sensor

ZMPT 3X Module. Convert AC Voltage to lower AC Voltage for use with RPICT series. Power Jack 2.1mm cable provided. Length 0.5m. Documentation Note not all RPICT units supports the ZMPT101B Module. Supported units are * RPICT7V1  RPICT4V3 Version 4 * RPICT7V1  RPICT4V3 Version 5 Range: For UK/EU type power lines use 280V. For US type power lines use 140V.
Price £23.00
More
In Stock