• New
RPICT8 Slave V6
  • RPICT8 Slave V6
  • RPICT8 slave Version 5

RPICT8 slave Version 6

RPICT8_Slave_DIQU

Connect up to 8 Current sensors to a Raspberrypi.

This is the slave version of the RPICT8 this can only work with a master RPICT board version 6 such as RPICT8 or RPICT7V1 or RPICT4V3.

Package includes slave stand off for mounting onto master board.

Rating (A)
£37.50
VAT excluded
Quantity
In Stock
98 Items

Description

Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other".

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding  electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Product Details
RPICT8_Slave_DIQU
98 Items

4 other products in the same category:

RPICT3V1T1

Reference: RPICT3V1T1_XASY

RPICT3V1T1

RPICT3V1T1 - Raspberrypi AC current, voltage and temperature hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included.
£20.00
More RPICT3V1T1
In Stock
5A CT Signal Conditioner Board for RPICT Series | LeChacal

5A Conditioner for RPICT

5A Conditioner This is an adaptor board to allow RPICT Series Version 6 to monitor 5A output CT's. This product requires 3.5mm stereo jack to connect to the RPICT card (not included)
£22.00
More 5A Conditioner for RPICT
In Stock
RPICT3T1_RLY2

Reference: RPICT3T1_RLY2_DETM

RPICT3T1_RLY2

Raspberrypi CT Adaptor Connect up to 3 Current and 1 temperature sensor to a raspberrypi. 2 250V/120V relays.
£33.00
More RPICT3T1_RLY2
In Stock
RPICT4W3T1

Reference: RPICT4W3T1_UWWM

RPICT4W3T1

RPICT4W3T1 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included.
£70.00
More RPICT4W3T1
In Stock

You might also like

RPICT4V3 Master Version 6

Reference: RPICT4V3_JSTL

RPICT4V3 Master Version 6

RPICT4V3 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included. Earlier version can be found here. RPICT4V3 VERSION 5.
£48.00
More RPICT4V3 Master Version 6
In Stock
RPICT7V1 Master Version 6

Reference: RPICT7V1_LUMU

RPICT7V1 Master Version 6

RPICT7V1 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included. Earlier version can be found here. RPICT7V1 VERSION 5.
£48.00
More RPICT7V1 Master Version 6
In Stock
RPICT8 Master Version 6

Reference: RPICT8_HCQL

RPICT8 Master Version 6

RPICT8 - Raspberrypi AC current hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included. Earlier version can be found here. RPICT8 Version 5.
£48.00
More RPICT8 Master Version 6
In Stock