RPICT3T1_RLY2
  • RPICT3T1_RLY2
  • RPICT3T1_RLY2
  • RPICT3T1_RLY2
  • RPICT3T1_RLY2
  • RPICT3T1_RLY2

RPICT3T1_RLY2

RPICT3T1

Raspberrypi CT Adaptor

Connect up to 3 Current and 1 temperature sensor to a raspberrypi.

2 250V/120V relays.

Rating (A)
£35.50
VAT excluded
Quantity
In Stock
25 Items

Description


RPICT3T1_RLY2 - Raspberrypi CT/Temperature Hat with Relays


Connect up to 3 Current 1 Temperature sensors to a Raspberrypi and control 2 relays.



Documentation


  • 3x Current sensor ports
  • 1x DS18B20 temperature port
  • 2x 250V/120V Relays
  • Arduino IDE programmable
  • EmonCMS compatible.
  • Plain text serial output
  • Attiny84 Microcontroller
  • View/record data using Linux/Python/Emoncms/InfluxDB

Package Content

  • 1 RPICT3V1_RLY2 Unit.
  • 2 Standoff
  • 4 Screws

Recommended Sensors

  • Temperature: DS18B20
  • Current: SCT-013-000 SCT-019 SCT-006 SCT-024 SCT-031
(for any other CT sensor please contact us to have adapted resistor mounted and calibration coefficients)


Emoncms Ouput:


Rpict3t1_emoncms_channels.png






This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding  electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Product Details
RPICT3T1
25 Items

4 other products in the same category:

RPIZ_CT3V1T1

Reference: RPICT3V1T1_BZOP

RPIZ_CT3V1T1

RPIZ_CT3V1T1 - Raspberrypi AC current, voltage and temperature hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included.
£25.00
More RPIZ_CT3V1T1
In Stock
OPICT8 for Orange Pi

Reference: OPICT8_LOMR

OPICT8 for Orange Pi

OPICT8 - Orange Pi AC current hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Orange Pi are not included.
£38.00
More OPICT8 for Orange Pi
In Stock
RPIZ_CT3T1

Reference: RPIZ_CT3T1_TUPJ

RPIZ_CT3T1

RPIZ_CT3T1 - 3 CT and 1 Temperature AC adaptor for Raspberrypi zero. Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included. Documentation
£17.50
More RPIZ_CT3T1
Last items in stock
RPICT3V1_RLY2

Reference: RPICT3V1_RLY2_BJQJ

RPICT3V1_RLY2

Raspberrypi CT Adaptor Connect up to 3 Current and 1 voltage sensors to a raspberrypi. 2 250V/120V relays,
£33.00
More RPICT3V1_RLY2
In Stock

You might also like

DS18B20 Junction Board

Reference: DS18_JUNCT01

DS18B20 Junction Board

Junction board for DS18B20 sensors. Allow to connect up to 8 DS18B20 probe directly onto screw terminals. Board can be daisy chained to extend the number of connection. Compatible with our DIN rail mounts. Package includes * 1 DS18B20 Junction Board * 1 20cm 3way cable for connection with RPICT series.
£7.00
More DS18B20 Junction Board
In Stock