OPICT8 for Orange Pi
  • OPICT8 for Orange Pi
  • OPICT8 for Orange Pi
  • OPICT8 for Orange Pi

OPICT8 for Orange Pi

OPICT8_

OPICT8 - Orange Pi AC current hat

Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other".

Sensors and Orange Pi are not included.

Rating (A)
£40.50
VAT excluded
Quantity
In Stock
10 Items

Description

 

OPICT8 Version 5

Orange Pi AC current hat



Online Documentation


  • 8x AC Current Ports.
  • Provides Irms, EstimatedP, Frequency.
  • View/record data using Linux / Python / Emoncms / Grafana / MQTT and more.
  • Configurable from serial port.
  • Open Source Arduino Firmware.
  • Stackable with RPICT8 Slave.

Package Content

  • 1 RPICT8 Unit.
  • 4 Mounting Stand off with screws.
The listing does not include sensors and Orange Pi.

Recommended Sensors

Current:

(for any other CT sensor please contact us to have adapted resistor mounted and calibration coefficients calculated)

Technical Specifications

Microcontroler Atmel Atmega328p
MCU Frequency 16Mhz
Operating Voltage 5V
Waveform Sampling 4400sps
Fastest Data Polling 1600ms (all 8 channels)
Vertical Resolution 12 bits (4096 steps)
Communication UART Serial Port
Firmware Arduino (open source)
Dimensions 56x65mm
Programming port 6 pin ISP
Compatible OS Any supporting GPIO serial port access
Compatible Raspberrypi All of Family 1,2,3,4 and Model A, B
Compatible CT Current output type
AC Current Range Options from 20A to 600A
AC Voltage Range Options from 140V to 280V
Smallest Readable Current Approx 50mA to 150mA

Scope of Use

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This
evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

 

Product Details
OPICT8_
10 Items

4 other products in the same category:

RPICT8 Master Version 5

Reference: RPICT8_GCFK

RPICT8 Master Version 5

RPICT8 - Raspberrypi AC current hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included.
£38.00
More RPICT8 Master Version 5
In Stock
RPICT7V1 Master Version 5

Reference: RPICT7V1_YJDJ

RPICT7V1 Master Version 5

RPICT7V1 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included.
£38.00
More RPICT7V1 Master Version 5
In Stock
RPICT USB Adaptor

Reference: RPICT_USB

RPICT USB Adaptor

RPICT USB Adaptor Connect any RPICT unit to the USB port of a computer or Raspberrypi. Package Include. * 1 RPICT USB Adaptor * 1 USB Cable
£15.00
More RPICT USB Adaptor
In Stock
RPICT3T1

Reference: RPICT3T1_WIEC

RPICT3T1

RPICT3T1 - Raspberrypi AC current hat with Temperature Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included.
£16.50
More RPICT3T1
In Stock

You might also like