RPICT8 slave Version 5
  • RPICT8 slave Version 5
  • RPICT8 slave Version 5
  • RPICT8 slave Version 5
  • RPICT8 slave Version 5

RPICT8 slave Version 5

RPICT8_slave_WYDZ

Connect up to 8 Current sensors to a Raspberrypi.

This is the slave version of the RPICT8 this can only work with a master RPICT board version 5 such as RPICT8 or RPICT7V1 or RPICT4V3.

Package includes slave stand off for mounting onto master board.

Rating (A)
Slave Type
£30.00
Quantity
In Stock

Description

Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other".

Slave type: Choose the slave number. There are 2 types. 'Slave 1 or 3' type or 'slave 2 or 4' type. This defines how the connectors are soldered to be stacked on the board just below it. You can choose 'unsoldered' to solder the connector yourself which allows you to decide the slave type at installation time.

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding  electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Product Details
RPICT8_slave_WYDZ
67 Items
4 other products in the same category:

Reference: RPIZ_CT3T1_TUPJ

RPIZ_CT3T1

RPIZ_CT3T1 - 3 CT and 1 Temperature AC adaptor for Raspberrypi zero. Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included. Documentation
Price £17.50
More
Last items in stock

Reference: RPICT3V1T1_XASY

RPICT3V1T1

RPICT3V1T1 - Raspberrypi AC current, voltage and temperature hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included.
Price £20.00
More
In Stock

Reference: RPICT3T1_WIEC

RPICT3T1

RPICT3T1 - Raspberrypi AC current hat with Temperature Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included.
Price £16.50
More
In Stock

Reference: RPIZ_CT3V1_WSZQ

RPIZ_CT3V1

RPIZ_CT3V1 - 3 CT and 1 Voltage AC adaptor for Raspberrypi zero. Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included. Documentation
Price £17.50
More
In Stock
You might also like

Slave Spacer RPICT8 - Enclosure Kit

Slave enclosure spacer for RPICT8. For use with the enclosure kit for RPICT. For slave slot only. Master slot uses different enclosure spacer. Package includes 1x 3D printed Parts Note. 3D printed parts are fragile. Handle with care.
Price £4.50
More
In Stock

Reference: RPICT8_GCFK

RPICT8 Master Version 5

RPICT8 - Raspberrypi AC current hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included.
Price £38.00
More
In Stock