• £ 30.00 In Stock

    Raspberrypi CT Adaptor Connect up to 3 Current and 1 temperature sensor to a raspberrypi. 2 250V/120V relays.

    £ 30.00
    In Stock
  • £ 45.00 In Stock

    Raspberrypi ZERO CT Adaptor Connect up to 4 Current and 3 voltage AC. Also support for DS18B20 temperature sensors and RTD Thermocouples. Documentation. Sensors on picture and Raspberrypi not included. Package includes: * RPIZ_CT4V3T2 board * MAX31865 module mounted (RTD) * 4 stand off. * 5x2 connector to solder on Raspberrypi. * Molex connector for DS18B20.

    £ 45.00
    In Stock
  • £ 9.00 In Stock

    Enclosure Kit for EmonWRT3 Package includes 2x 3D printed Parts 2x M3 Screws 2x M3 Nuts Note. 3D printed parts are fragile. Handle with care.

    £ 9.00
    In Stock
  • £ 4.50 In Stock

    Slave enclosure spacer for RPICT4V3. For use with the enclosure kit for RPICT. For slave slot only. Master slot uses different enclosure spacer. Package includes 1x 3D printed Parts Note. 3D printed parts are fragile. Handle with care.

    £ 4.50
    In Stock
  • £ 6.55 Out of stock

    SCT-006 20A rating. Cable length 30cm. Sold with Jack connector to plug in RPICT units.

    £ 6.55
    Add to cart More
    Out of stock
  • £ 16.00 In Stock

    RPIZ_CT3T1 - 3 CT and 1 Temperature AC adaptor for Raspberrypi zero. Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Sensors and Raspberrypi are not included. Documentation

    £ 16.00
    In Stock
  • £ 35.00 In Stock

    RPICT4V3 - Raspberrypi AC current and voltage hat Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other". Voltage Sensor Type: Choose the desired support for the voltage port. Sensors and Raspberrypi are not included.

    £ 35.00
    In Stock
  • £ 25.00 In Stock

    EmonWRT3 CT1V1T1 Base Board 3 CT sensor port 1 Voltage sensor port 1 Temperature sensor port Forward to Emoncms Influxdb or other iot server Ethernet/Wifi Web configuration OpenWRT & Arduino build Documentation Note: The SKW71 module is required to run the unit and can be purchased in our shop.

    £ 25.00
    In Stock
  • £ 24.00 £ 35.00 In Stock

    Connect up to 4 Current and 3 voltage sensors to a raspberrypi. Rating: Choose the maximum rms current in Ampere the board can support with the associated CT. For any custom setup please opt for "other".

    £ 24.00 £ 35.00
    Reduced price!
    In Stock
  • £ 14.00 £ 35.00 In Stock

    RPI_LCT8 400Aor more 8 CT ports For any 5A output CT (in particular SCT-024 400A/5A) RPI_LCT8 is similar to RPICT8 version 3 with screw terminal connectors for connecting larger CT sensors. Unit comes ready for 400A CT using SCT-024/5A. Documentation Product Clearance. Last units being sold. We do not sell any 5A output CT any more and this should be...

    £ 14.00 £ 35.00
    Reduced price!
    In Stock