RPICT3V1Raspberrypi 3x CT - 1x Voltage

New product

Raspberrypi CT Adaptor

Connect up to 3 Current and 1 voltage sensors to a raspberrypi.

More details

466 Items

£ 15.00

Add to wishlist

More info



RPICT3V1 - Raspberrypi SCT Adaptor


IMG_1120_small.pngConnect up to 3 Current and 1 voltage sensors to a Raspberrypi



Documentation


  • 3x Current sensor ports
  • 1x AC Voltage sensor ports
  • Arduino IDE programmable
  • EmonCMS compatible.
  • Attiny84 Microcontroller
  • View/record data using Linux/Python/Emoncms
  • Configurable from serial port


Package Content

  • 1 RPICT3V1 Unit.
  • 2 Mounting Spacers
  • 4 Mounting Screws

Recommended Sensors

  • Voltage: 77DB-06-09 77DE-06-09 77DA-10-09
  • Current: SCT-013-000
(for any other CT sensor please contact us to have adapted resistor mounted and calibration coefficients)


Default Configuration



Parameters:


Node ID: 11
Scan interval: 5 seconds
Output: Emonhub

Default loaded sketch freely available on the wiki page.

Emoncms Ouput:


Rpict3v1_channel_emoncms.png


IMG_1121_small.png
IMG_1118_small.png


This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by LeChacal.com to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This
evaluation board/kit does not fall within the scope of the European Union directives regarding  electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Reviews

Grade 
2020-05-11

Excellent !

Quick delivery and fantastic email support. This neat RPi hat fits inside a standard pi case.
Works perfectly with easy code examples.
Thank you!

  • 1 out of 1 people found this review useful.

Write a review

RPICT3V1Raspberrypi 3x CT - 1x Voltage

RPICT3V1Raspberrypi 3x CT - 1x Voltage

Raspberrypi CT Adaptor

Connect up to 3 Current and 1 voltage sensors to a raspberrypi.

Accessories